This firmware update Version 01.030300 for WUX450, WX520, WUX400ST and WX450ST projectors running with firmware versions earlier than 01.030300.
Thank you for using Canon products.
Details
Firmware Version 01.030300 incorporates the following improvements:
1. Improves fan rotation pattern to reduce fan noise when the Projector is in Power Saver Mode.
2. Enables Standby mode to be identified by the Power ON LED indicator flashing at an interval of four seconds.
3. Addresses an issue when the network function set to OFF (default setting). User menu settings are now retained even if the projector is turned OFF immediately after changing the menu setting.
This firmware update is for the above-listed projectors running a firmware version that is earlier than Version 01.030300. If the firmware version of the projector is already Version 01.030300, there is no need to update the firmware. After the firmware update, it is possible to restore the projector to a previous firmware version. For customers who wish to restore the projector to a previous firmware version, please contact your local service center.
How to Download and Install the Firmware
If you wish to perform the firmware update, please download the firmware and the firmware update procedure guide from our Web site.
For further details on the item 2 above, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update. Download the new version of the Instruction Manual for the Projectors.
Target Models and New Firmware Version
Model New Firmware Version
| WUX450 |
01.030300
|
| WX520 |
01.030300 |
| WUX400ST |
01.030300 |
| WX450ST |
01.030300 |
Firmware version confirmation method:
You can confirm the firmware version by following the steps below.
1. Project a blank screen.
2. Press the MENU button on the Side Control (or on the remote control) of the projector to display the menu screen.
3. Use the right pointer button to go to the [Information] tab.
4. Check the firmware version.
Regarding the Software Included in this Firmware
The software included in this firmware is comprised of software modules developed by both Canon and third parties.
Software Developed by Canon and Free Software
Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws. This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license.
Display of License Information of Free Software Modules Included in this Firmware
The license information required to be displayed for the free software modules included with this firmware is saved in the download file. If you want to check the license list, please see the ThirdPartySoftware.pdf file in the thirdparty_software\LICENSE folder. Furthermore, if you want to check the license for each of the free software modules, please see the text file stored in the thirdparty_software\LICENSE folder.
Obtaining Source Codes of Free Software
Some free software modules require the acquisition of the source code in order to distribute the executable form of those software modules. To obtain the source code for the software modules, please contact the Canon Regional Headquarters for your country of residence.
Further Information
Download WUX450, WX520, WUX400ST and WX450ST Firmware Update version 01.030300
Close
