Canon XF205/XF200 Professional Camcorder, Firmware Version 126.96.36.199 [Mac OS]
Content Id: 0400381902
Firmware Version 188.8.131.52 incorporates the following additions and improvements. 1. Fixes a phenomenon in which the start time code is not correctly displayed when MP4 clips captured at 59.94P/50.00P frame rate are imported into NLE software. *This applies to cameras equipped with Firmware Version 1.0.3.x - 1.0.4.x. MXF clips are not affected.
Caution: Firmware Version 184.108.40.206 is for XF205/XF200 camcorders with Firmware Version 1.0.0.x - 1.0.4.x. If your camcorder's firmware is already Version 1.0.5.x, it is not necessary to update the firmware. Once the camcorder is updated to the latest version, it cannot be restored to a previous version.
Preparations for the Firmware Update: After the Firmware update has been performed, the camcorder's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camcorder and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
The downloaded folder contains the firmware (file name: VKC6.FIM / file size: 44,358,992 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following items are required to perform this firmware update: 1. An XF205 or XF200 camcorder body 2. A computer (OS: Mac OS 10.7-10.13) 3. A 64 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available) 4. An SD card reader/writer (commercially available) or an SD card slot built into the computer 5. A fully charged battery pack for the camera 6. Compact power adapter bundled with the camera 7. The firmware (the downloaded file)
History: Changes in Version 220.127.116.11: Note: The phenomena described below only occur in Version1.0.3.x. 1. Fixes a phenomenon in which the frame rate on the MP4 index screen is always shown as 23.98P. (This only occurs on the MP4 index screen; the frame rate shown during playback is correct.) 2. Fixes a phenomenon in which the camcorder doesn't start up in some cases when the mode is switched from the MP4 index screen (MEDIA mode) to CAMERA mode. (When this phenomenon occurs, the camcorder can be restored by removing then reinserting the battery.)
Changes in Version 18.104.22.168: 1. IP streaming has been added, which is an image (video) transmission method. 2. Slow and fast motion recording function has been added for the MP4 format. 3. Improved zoom operation when using the Browser Remote application. 4. Improved the user interface to simplify configuration of the camcorder network settings.
Changes in Version 22.214.171.124: 1. Adds an image mode that reduces the level of noise during shooting. 2. Corrects the pre-recording control mechanism when recording in MP4 format.
Changes in Version 126.96.36.199: 1. Corrects a phenomenon that in which after returning the Camcorder from Power Save mode, footage captured in MXF format (on CF card) may be shaky.
File Name : xf205-v1050-mac.dmg File Type : FA File Size : 33275006KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.