Canon Digital Cinema Camera EOS C700 FF / EOS C700 FF PL Firmware Version 184.108.40.206.00 [Mac OS]
Content Id: 0400444502
Firmware Version 220.127.116.11.00 incorporates the following enhancements: 1. Chromatic aberration correction has been added for the following EFP lenses: - CJ45e x 9.7B IASE-V H - CJ45e x 13.6B IASE-V H 2. Support for these EFP lenses has been added. - CJ24e x 7.5B IASE S - CJ18e x 7.6B IRSE S / IASE S - CJ14e x 4.3B IRSE S / IASE S 3. For LUTs that can be applied to output footage, support for the ITU-R BT.2100 standard and ITU-R BT.2408 report have been added for the following terminals:. - SDI OUT terminals - MON. terminals - HDMI OUT terminal [HDR-PQ (OOTF On/Off)] will change to [HDR-PQ*1]. Changes have been made so that the [HDR: PQ] and [HDR: HLG] base luminance correspond to Diffuse White (100%) being 203nits*2. - VIDEO terminal (optional Viewfinder) [HDR 1600% (OOTF On/Off)] will change to [HDR 1600%*1]. [HDR 400% (OOTF On/Off)] will change to [HDR 400%*1]. *1 OOTF On *2 The brightness before the change to OOTF On 83nits / OOTF Off 111nits. The HLG output is the brightness in the case of displaying on a 1000nits monitor. Please use the Canon lookup table that is released on and after November, 2018. 4. Fixes a phenomenon in which of signal outputting of more than 100% occurs when the following combination of settings is selected. - LUT: HDR-HLG output - Color Space: BT.2020 5. Support for Double slot recording in Full Frame sensor mode has been added for the following settings.*3 - XF-AVC 59.94P / 50P - ProRes 59.94P / 50P *3 Double slot recording cannot be used together with relay recording, or with slow & fast motion recording. Refer to the Instruction manual for more details.
For further information, please refer to the latest version of the camera's Instruction Manual that is released with the firmware update.
Caution: - Firmware version 18.104.22.168.00 is for updating Cinema EOS C700 FF cameras running firmware version 22.214.171.124.00 . If your camera's firmware is already version 126.96.36.199.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version. - For customers who are using the optional OU-700 Remote Operation Unit, the firmware of the camera and the OU-700 Remote Operation Unit have to be the same. After updating the camera firmware, connect the camera with the OU-700 to update the firmware of the OU-700 from the camera's system settings.
Preparations for the Firmware Update: - You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD / SDHC / SDXC memory card that is 128MB or more for the firmware update. - After the firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings". - The downloaded folder contains the firmware (file name: VMI2.FIM / file size: 114,917,596bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following things are required to perform this firmware update: 1. A Cinema EOS C700 FF / EOS C700 FF PL camera body 2. A computer (OS Requirements: Mac OS X 10.7 - 10.14) 3. A 128MB or higher-capacity SD / SDHC / SDXC memory card (both commercially available) 4. An SD card reader/writer (commercially available) or an SD card slot built into the computer 5. Full charged V-mount battery (commercially available), 14.8 V DC (acceptable range: 12 V to 20 V DC) 6. Power adapter (commercially available, DC IN 12V terminal): 4-pin XLR plug (female connector), 12 V DC (acceptable range: 11.5 V to 20 V DC), 10 A (acceptable maximum load current) 7. The firmware (the downloaded file)
File Name : c700ff-v1011-mac.dmg File Type : FA File Size : 112306030KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.