Saving Images to a Computer using Windows (Windows 10) (Interchangeable-lens Digital Cameras)

You can connect the camera to a computer via a USB cable, and save images to a computer running Windows OS without installing any additional software applications.

Caution

Caution

Connect the Camera to the Computer

1. Connect the camera to the computer.

With the camera turned off, open the cover ( ).

With the smaller plug of the cable in the orientation shown, insert the plug fully into the camera terminal ( ).

Caution

Insert the larger plug of the cable in the computer’s USB port.

For details about USB connections on the computer, refer to the computer user manual.

2. Turn on the camera.

Press the ⋖ ⋗ button.

Caution

3. Click [File Explorer] on the taskbar appearing on the bottom of the screen.

4. When the following screen appears, select [This PC] from the menu items on the left side.

5. Select the camera connected to the PC (), and then right-click on the icon. Next, select [Import pictures and videos] () from the screen displayed.

6. Click [Next] when the [Import Pictures and Videos] screen is displayed.

7. Click [Import] to begin image transfer.

Caution

[Select All] is set by default.

To select images to import individually, remove the check from [Select All], and append desired images with a [ ].

8. Image import (transfer) begins.

9. When image transfer is complete, a screen similar to the following one appears.

This completes the procedures for importing images.

Changing the Automatic Start-up Settings for Software Applications.

To prevent software applications from starting automatically, follow the procedures below to change the [AutoPlay] settings.

1. Click the [Start] button appearing at the bottom left of the screen (), and then choose [Settings] ().

2. Choose [Devices] from the screen displayed.

3. Select [AutoPlay] () from the options appearing on the left of the screen to display the AutoPlay setting screen, select the camera () connected to the computer and right-click the icon.

4. Make the settings.

This completes the procedure for changing the AutoPlay settings.