imagePROGRAF Direct Print & Share Ver.2.6.0 (Windows)
For Windows 10, Windows 8.1, Windows 7 Updated 20 May 2020
Content Id: 0200566402
About the driver
imagePROGRAF Direct Print & Share is software that allows you to directly print files without opening them and to share files via cloud storage.
[Ver.2.6.0] - Registering unsupported sized file by the driver became available. - AutoCAD 2020 became supported. (64-bit OS only) - The supported models have been added.
[Ver.2.5.0] - The supported models have been added.
[Ver.2.4.0] - Status Monitor became able to be started up automatically, which made it easier to check printer status. - Displaying registered files in thumbnail became possible. - Saving print settings became possible. - Inserting blank pages became possible so that the job end is easy to be found. - Keeping print history remained became possible, which made it easier to print in the same settings. - Enlarging the main screen to the maximum size became possible, which made it easy to check preview. - AutoCAD 2019 has been supported. - The supported models have been added. - Windows 8 became unsupported.
[Ver.2.3.0] - The supported models have been added. - Change the supported application. For details, refer to the information given in the contents. - When selecting [Monochrome] in [Color Mode], preview is displayed in black and white.
[Ver.2.2.0] - When uploading or downloading a poster file in PosterArtist with using cloud, the actual image of the poster is able to be confirmed in preview. - When selecting other than [Match Page Size] in [Paper Size:], magnification or reduction is operated automatically. - The supported models have been added.
[Ver.2.1.0] 1.Access method to "Google Drive" was changed. 2.AutoCAD2015 has been supported. 3.Part of installation function was modified.
[Ver.2.0.1] 1.An additional function that you can print files without displaying the Direct Print & Share screen by creating a shortcut print icon and dropping the files onto the shortcut print icon. 2.An additional function that you can force to process a file as HP-GL/2 by selecting and right-clicking a file and then selecting the Process in HP-GL/2 format check box.
The following hardware and software are recommended for this software.
OS: Windows 10(32bit) Windows 8.1(32bit) Windows 7 SP1 or later(32bit)
(Note) - For the Windows OS, use the latest version of Service Pack.
Hardware: Any computer running the software listed above.
Printer Driver: Canon imagePROGRAF Printer Driver V4.43 or later
Supported Cloud Service: Google Drive
Versions of AutoCAD Supported by the AutoCAD plug-in: AutoCAD 2008 to 2019 (32-bit)
Download / Installation Procedures 1. Download the file. For the location where the file is saved, check the computer settings. 2. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
Precautions During Installation - Administrative privileges are required for the installation. - Before performing the installation, close all the other application software. - If a document is currently being printed out, then wait until printing ends or quit that application.
Note the following limitations when using this software. - The cloud service might not be available depending on the country or region where you are using this software.
File Name : dps_-win32-2_6_0-ea10_3.exe File Type : AP File Size : 30358400KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.