Changes in the Firmware Firmware Version 1.1.5 incorporates the following fix:
1. Corrects a phenomenon in which when using the camera with the EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.
Firmware Version 1.1.5 is for cameras with Firmware Version 1.1.4 or earlier. If your camera's firmware is already Version 1.1.5, it is not necessary to update the firmware. When updating the firmware of your camera, please review the instructions thoroughly before you update the firmware.
Preparations for the Firmware Update:
Macintosh After the downloaded compressed file (.dmg file) is extracted, a firmware folder is created.
*Extracting the downloaded file: The downloaded folder is automatically extracted, and a firmware folder is created. If the download folder cannot be automatically extracted, double-click the folder.
The extracted folder contains the firmware (file name: 1D400115.FIR / file size: 12,874,588 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
(The following is the history of past firmware updates.)
Q: Are the improvements from previous firmware versions included in Firmware Version 1.1.5? A: Yes, the following improvements from the previous version are included:
(Previous) Version 1.1.4 improvements: 1. Resolves the following phenomenon: when the camera is not attached to a lens, power consumption may be higher than usual, causing premature battery drain. 2. Resolves a phenomenon in which "Err 02" may be displayed when the shutter is released without a lens attached.
(Previous) Version 1.1.3 improvements: 1. Enables the center AF point to autofocus when the camera is used with the EF 200-400mm f/4L IS USM Extender 1.4x lens and an Extender, whose combined maximum aperture is f/8. 2. Fixes a phenomenon in which abnormal images may result when continuous shooting mode is enabled and the image size is set to "RAW" or "RAW+JPEG".
(Previous) Version 1.1.1 improvements: 1. Optimizes the camera’s exposure accuracy when using EF 24mm f/2.8 IS USM and EF 28mm f/2.8 IS USM lenses, which introduced in June, 2012. If these lenses are used with an EOS-1D Mark IV camera that has not been updated with the new firmware, the image may be overexposed depending on the subject and shooting scene.
(Previous) Version 1.1.0 improvements: 1. Improves writing/reading speeds when using UDMA 7-compatible CF cards. 2. Fixes a phenomenon where the ability to shoot movies may be stopped under the following conditions: * When using high-capacity (32 GB or greater) CF cards with little available space remaining and the user attempts to start shooting movies; or * When the camera’s battery is removed and reinserted into the camera and the user immediately attempts to start shooting movies. 3. Corrects misspellings in the menu screens displayed in Arabic and Portuguese languages (applies to models outside of the Japanese market only).
(Previous) Version 1.0.8 improvements: 1. Fixes a phenomenon in which the set aperture moves unexpectedly when shooting movies in manual exposure mode using some Canon lenses (such as macro lenses). Supplemental Information: This phenomenon involves the aperture of the lens moving unexpectedly when the focusing ring moves (during focusing). Please note that aperture values also change when operating the zoom ring of a zoom lens that has variable maximum aperture values; however, this is a normal operation because the camera controls aperture values properly depending on the focal length (zoom position). 2. Corrects misspellings in the French and Spanish menus for applicable products.
(Previous) Version 1.0.6 improvements: 1. Enhances the AF tracking performance. AF performance has been enhanced for receding subjects and for subjects that are approaching at a low speed.
File information
File Name : eos1d4-v115-mac.dmg File Type : FA File Size : 14768052KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.