MAXIFY IB4060 Support
FAQ and troubleshooting

How to update the printer firmware

Content Id: 8202331200


Firmware update history

Ver.4.000

1. Printing from the Windows 10 Mobile becomes available.

Ver.2.020

1. The new functions of Google Cloud Print have become available as below.

- Local Discovery:

You can search for a printer and register it via Google Chrome as long as the printer is connected to the same network.

- Local Printing:

You can print from an information device that is connected to the same network as the printer regardless whether the printer is connected to the Internet or not.

2. Supported for the security specification change of Google Cloud Print.

Required environment

For the update, the printer needs to be connected to the Internet.

(A) Internet

(B) Access point or router

(C) Printer

Update notice

When the printer is connected to the Internet and if the latest firmware is available on the server, the printer will give the following message:

"The latest firmware is on the server

Press [OK] "

To update the printer firmware, follow the procedures for updating the printer firmware below.

Caution

The printer will give the update notice every 24 hours until the printer firmware is updated. Prompt update is recommended.

Procedures for updating the printer firmware

To update the printer firmware, follow the steps below.

Caution

DO NOT power off the printer during the update.

(1) Power on the printer.

(2) Press the [ Setup ] button.

The [ Setup menu ] screen is displayed.

(3) Use the button to select [ Device settings ], then press the OK button.

(4) Use the button to select [ Firmware update ], then press the OK button.

(5) Use the button to select [ Install update ], then press the OK button.

The machine starts searching for the latest firmware on the server.

(6) Check the status of the firmware on the server.

If the latest firmware is on the server, [ The latest firmware is on the server ] is displayed on the LCD. Press the OK button to proceed to the next procedure.

(7) Check the firmware version that is displayed, then press the OK button.

(8) Use the button to select [ Yes ], then press the OK button.

(9) Check the message that is displayed, then press the OK button.

The machine starts the firmware update.

(10) Check the message that is displayed, then press the OK button.

The firmware update has been complete and the copy standby screen is displayed.

"Was this helpful?"