Canon Digital Cinema Camera EOS C100 Mark II Firmware Version 18.104.22.168.00 [Windows]
Content Id: 0400329202
Firmware Version 22.214.171.124.00 incorporates the following enhancements: 1. When CN-E70-200mm T4.4 L IS KAS S is attached the following features are enabled: - Autofocus using the Dual Pixel CMOS AF function. - The joystick on the camera's grip unit can be set to operate the zoom. - Manual control of the iris with Camera's Control dial. - Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100. - Automatic aperture and push auto iris functions. - Start/stop recording on the lens grip. - Retrieval of Lens metadata, such as the model name and the focal distance will display on the camera. 2. Adds peripheral illumination correction for the following lenses. - COMPACT-SERVO Lens [CN-E70-200mm T4.4 L IS KAS S] - EF Lens [EF 70-300mm f/4-5.6 IS II USM], [EF 16-35mm f/2.8L III USM] 3. When [Face Only] is active, the icon will change from gray to white when a face is not detected. 4. When the camera is turned off the IS mechanical lock will be active regardless of the position of the switch.
Caution: - Firmware Version 126.96.36.199.00 is for updating Cinema EOS C100 Mark II cameras running firmware version 188.8.131.52.00 - 184.108.40.206.00. If your camera's firmware is already version 220.127.116.11.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version. - For further information, please refer to the latest version of the unit's Instruction Manual that is released with the firmware update.
Preparations for the Firmware Update: After the Firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
The downloaded folder contains the firmware (file name: VKI7.FIM / file size: 42,532,896 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following things are required to perform this firmware update: 1. A Cinema EOS C100 Mark II camera body 2. A computer (OS Requirements: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1) 3. A 64 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available) 4. An SD card reader/writer (commercially available) or an SD card slot built into the computer 5. A fully charged battery pack for the camera 6. Compact power adapter bundled with the camera 7. The firmware (the downloaded file)
History Changes in Firmware Version 18.104.22.168.00 1. Shutter Angle Priority has been added. A constant shutter angle can now be maintained, regardless of any other camera settings being changed. 2. Support for peripheral illumination and chromatic aberration correction when the EF 24-105mm f/4L IS II USM lens is attached, has been added.
Changes in Firmware Version 22.214.171.124.00: 1. Fixes the phenomenon in which the aperture adjustment may not operate as expected when using the control dial on the grip unit when certain EF lenses* are attached. This occurs with EOS C100 Mark II cameras running Firmware Version 126.96.36.199.00 * EF 8-15mm f/4L Fisheye USM EF 11-24mm f/4L USM EF 16-35mm f/2.8L III USM EF 16-35mm f/4L IS USM EF 24-105mm f/4L IS II USM EF 24-70mm f/2.8 L II USM EF 24-70mm f/4L IS USM EF 24mm f/2.8 IS USM EF 28mm f/2.8 IS USM EF 35mm f/1.4L II USM EF 35mm f/2 IS USM EF 40mm f/2.8 STM EF 50mm f/1.8 STM EF 70-200mm f/2.8L IS II USM EF 70-300mm f/4-5.6L IS USM EF 100-400mm f/4.5-5.6L IS II USM EF 100mm f/2.8L Macro IS USM EF 200-400mm f/4L IS USM Extender1.4x EF 300mm f/2.8L IS II USM EF 400mm f/2.8L IS II USM EF 400mm f/4 DO IS II USM EF 500mm f/4L IS II USM EF 600mm f/4L IS II USM EF-S 15-85mm f/3.5-5.6 IS USM EF-S 18-135mm f/3.5-5.6 IS EF-S 18-55mm f/3.5-5.6 III EF-S 18-55mm f/3.5-5.6 IS II EF-S 24mm f/2.8 STM EF-S 55-250mm f/4-5.6 IS II
Changes in Firmware Version 188.8.131.52.00: 1. The following features are enabled when these lenses* are attached: CN7x17 KAS S/E1, CN-E18-80mm T4.4 L IS KAS S, or CN20x50 IAS H/E1. - Enables autofocus using the Dual Pixel CMOS AF function. (Not applicable to the CN20x50 IAS H/E1 lens) - Enables the joystick on the camera's grip unit to be set to operate the zoom. - Enables control of iris to be set to manual operation, and control of focus, zoom and iris using the separately-sold Remote Controller RC-V100. - Enables automatic aperture and push auto iris functions. - Enables retrieval of metadata, such as the model name and the focal distance of the lens attached, and display of metadata on the camera. *The lens firmware also needs to be updated. 2. Adds peripheral illumination correction for the following lenses. - COMPACT-SERVO lenses: CN-E18-80mm T4.4 L IS KAS S - CINE-SERVO lenses: CN20x50 IAS H/E1 - EF lenses: EF 35mm f/1.4L II USM, EF 50mm f/1.8 STM and EF-S 18-135mm f/3.5-5.6 IS USM 3. Enables the built-in monaural microphone to be set to Off.
Changes in Firmware Version 184.108.40.206.00: 1. Enables peripheral illumination correction for the following lenses - EF lenses EF 16-35mm f/4L IS USM EF-S 10-18mm f/4-5.6 IS STM EF 400mm f/4L DO IS USM EF 11-24mm f/4L USM EF 24-105mm f/3.5-5.6 IS STM EF 100-400mm f/4.5-5.6L IS II USM EF-S 24mm f/2.8 STM - CINE-SERVO lens CN7x17 KAS S/E1
File Name : c100mk2-v1051-win.zip File Type : FA File Size : 30668392KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.