Canon Group
Close Close
Menu Menu Close Close Search
PIXMA MX700 Support
FAQ and troubleshooting

Paper Jams

Content Id: 8200153800


Issue

Cause and solution

Paper jammed in the paper output slot, the Rear Tray, or the Front Tray.

Remove the paper following the procedure below.

(1) Slowly pull the paper out, either from the paper source or from the paper output slot, whichever is easier.

(A) When printing from the Rear Tray

(B) When printing from the Front Tray

If the paper tears and a piece remains inside the machine, open the Scanning Unit (Printer Cover) and remove it. After removing all paper, close the Scanning Unit (Printer Cover), turn the machine off, and turn it back on.

* Be careful not to touch the components inside the machine.

If you cannot pull the paper out, turn the machine off and turn it back on. The paper will be ejected automatically.

(2) Reload the paper in the machine, and press the OK button on the machine.

If you turned off the machine in step 1, all print jobs in queue are canceled. Reprint if necessary.

Caution

For details on how to load paper, see "Loading Paper".
When reloading the paper in the machine, see "Paper Does Not Feed Properly" to confirm that you are using the correct paper and are loading it into the machine correctly.
A5-sized paper are suited to print documents consisting mainly of text. We do not recommend using such paper to print documents with photos or graphics, since the printout may curl and cause paper exit jams.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative.

Cause and solution

Landscape credit card-sized paper jammed inside the machine.

Do not load credit card-sized paper in landscape orientation.

Slowly pull out the paper from the Rear Tray and remove it.

If you cannot remove the jammed paper or the paper jam error continues after removing the paper, contact your Canon service representative.

Cause and solution

Paper jammed inside the machine at the transport unit.

Remove the paper following the procedure below.

(1) Hold the Rear Cover Lever and then press to the right and pull to remove the Rear Cover.

(2) If you can see the jammed paper, slowly pull the paper out.

Be careful not to touch the components inside the machine.
If you cannot pull the paper out, turn the machine off and turn it back on. The paper will be ejected automatically.

(3) Reattach the Rear Cover.

Hold the Rear Cover so that the Rear Cover Lever comes to the left. Align the protrusions at the right edge of the cover with the slots at the rear of the machine and press on the lever to reattach the Rear Cover.

Caution

Press firmly on the Rear Cover until it is fit squarely in the rear of the machine. If the Rear Cover is not reattached properly, paper may not be fed properly and cause paper jams.

Cause and solution

(4) If you were not able to remove the paper out in step 2, remove it from the Front Tray.

(5) Reload the paper in the Front Tray and press the OK button on the machine.

If you turned off the machine in step 2, all print jobs in queue are canceled. Reprint if necessary.

When reloading the paper in the machine, see "Paper Does Not Feed Properly" to confirm that you are using the correct paper and are loading it in the machine correctly.

If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative.

Cause and solution

The last extension segment of the Output Tray Extension is standing upright.

When printing on Legal-sized paper, do not set the last extension segment of the Output Tray Extension upright.

"Was this helpful?"