Solution
Be Sure to Check Before SettingSwitching the Connection Method to Wireless LAN
Selecting a Method for Setting the Wireless LAN
Be Sure to Check Before Setting
The setup of the computer and wireless LAN or access point are must be completed.
If it is not set up, you will not be able to use the machine on the wired LAN network.
For the details, refer to the instruction manual for your network device or contact its manufacturer.
Caution
Precautions when connecting to a wireless LAN
Switching the Connection Method to Wireless LAN
1. Press [ ] (Menu).
2. Press [ ] or [ ] to select ⋖Network Settings⋗, and then press [OK].
The next screen is displayed for approximately 5 seconds.
Turn OFF/ON using Step 5. Turning this OFF/ON is not required.
3. Press [ ] or [ ] to select ⋖Select Wired/Wireless LAN⋗, and then press [OK].
4. Press [ ] or [ ] to select ⋖Wireless LAN⋗, and then press [OK].
5. Turns the machine OFF/ON when the following screen disappears.
It is necessary to turn the machine OFF/ON to activate the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Selecting a Method for Setting the Wireless LAN
Two methods are provided for connecting to the wireless LAN or access point, connecting using WPS (Wi-Fi Protected Setup) function or connecting manually.
Select the appropriate setting method after checking the following functions on the wireless LAN or access point you are using.
When WPS button is placed
Caution
Checking WPS functions
As an example, a symbol such as shown below can be seen on the shipping box or machine.
-
- This supports WPS (Wi-Fi Protected Setup).
If you are not sure if WPS is supported, contact the wireless LAN router or access point manufacturer.
When WPS button is not placed
Setup manually.