Turning the Printer ON
Caution
- Be sure to pull out the sealing tape of the toner cartridges installed in the printer before turning the power ON.
If you turn the printer ON without pulling out the sealing tape, an error message appears.
- Be sure to set the paper cassette in the printer before turning the power ON.
1. Press the "" side of the power switch on the printer.
All the indicators on the printer blink, and the printer initiates a self-diagnostic test on the printer unit.
If the self-diagnostic test result is normal
The (Ready) indicator (green) comes on, and the printer is ready to print.
If the self-diagnostic test result is not normal
The (Alarm) indicator (orange) comes on/blinking. [The Alarm Indicator Is On/Blinking]
Turning the Printer OFF
1. Make sure that the printer is not in any of the following states before turning it OFF.
Caution
If you turn the printer OFF, all print data remaining in the printer memory will be erased.
2. Press the "" side of the power switch on the printer.
Caution
When the "" side of the power switch on the printer is pressed, the power consumption is 0 W.