Canon Group
Close Close
Menu Menu Close Close Search

ME20F-SH Firmware Update version 1.0.3.1 00

30th March 2017
Thank you for using Canon products.

Changes:
This firmware update (Version 1.0.3.1 00) incorporates the following enhancements.

1. Three camera modes have been added:
- Tv: Shutter speed is selectable. Iris, Gain and ND Filter※ are set automatically.
- Av: Iris is selectable. Shutter speed, Gain and ND Filter※ are set automatically.
- AGC: Shutter speed and Iris are selectable. Gain and ND Filter※ are set automatically.
※ND Filter can also be set manually.

2. The following features are enabled for the CN-E18-80mm and T4.4 L IS KAS S:
- Saving and displaying metadata, such as the model name and the focal distance of the lens when attached.
- Support for Peripheral Illumination Correction.
- Manual Iris control via the camera’s joystick.
- Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
- One shot autofocus.
- Automatic aperture and push auto iris functions.
- Operation of REC start/stop by the separately-sold ZSG-C10.

3. Adds Peripheral Illumination Correction for the following lenses:
EF 100-400mm f4.5-5.6L IS II USM
EF 35mm f/1.4L II USM
EF 24-105mm f4L IS II USM

4. Adds chroma-key correction function.

5. Adds three white balance modes when the camera is set to Auto: custom White Balance Set, Preset and Color temperature.

6. Adds 25PsF on output format.

7. Adds [59.94P(i)]* and [50.00P(i)]* output setting for Monitor terminal.
- When the frame rate is set to 59.94P (NTSC) or 50.00P (PAL), the 3G/HD-SDI 1 / MONITOR terminal can be set to output interlaced signal.
* When using this setting 3G/HD-SDI 2 will output progressive signal. 

Notes:
Firmware Version 1.0.3.1.00 is for ME20F-SH cameras with Firmware Version 1.0.0.1.00 – 1.0.2.1.00. If your camera’s firmware is already Version 1.0.3.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.

For further information, please refer to the latest version of the unit’s Instruction Manual that is released with the firmware update. 

Further information:

Firmware Download Link ME20F-SH Firmware


Share this page