Canon Group
Close Close
Menu Menu Close Close Search

CR-N100 Firmware Update Version 1.1.0

2nd July 2024

Thank you for using Canon products.

Firmware Version 1.1.0 incorporates the following fixes and enhancements:

1. Adds Lite version of the automatic tracking application. Lite version application has basic features of the automatic tracking application.
2. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], and [Black: Master Black Blue] more widely.
3. Revises the display of Clear Scan Settings.
4. Adds function for turning [S/N Priority] ON or OFF when [Noise Reduction] is set to [Auto]. When ON, noise reduction is prioritized.
5. Adds function for setting a limit on the range of operation of the pan / tilt.
6. Enables the ability to set zoom and focus speeds in more detail.
7. Enables the ability to make [Speed Level] of Preset setting a finer adjustment at lower speeds.
8. Adds function for color bar output.
9. Adds function for selecting SDI output timecode superposition on or off.
10. Increases the maximum frame rate for USB output.
11. Enables YUV format USB output.
12. Displays the Camera Name set by the user at the top of the settings page.
13. Increases target bit rate limit when using encryption with SRT protocol.
14. Adds function for registering the still thumbnail when a preset memory is registered.
15. Adds function for registering the still thumbnail of the trace start position.
16. Adds function for freeze image during preset moving.
17. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
18. Adds the option “other than network settings and management information” as restore items for the backup/restore function. When selected this option, network settings and management information are not saved.
19. Adds Backup/Restore function for Add-On Applications System settings.
20. Fixes minor issues.

Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.

<Firmware file>
- crn100-v110.bin

The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.

Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.

Windows 11, Windows 10 64bit
macOS 14, macOS 13

Preparations for a firmware update:
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.

Further information:
CR-N300 Firmware Download Link

Share this page