Canon ME20F-SH Firmware Version 184.108.40.206.00 [Mac OS]
Content Id: 0400440102
Firmware Version 220.127.116.11.00 incorporates the following enhancements. 1. Support for the color matrix function has been added. 2. Support for the color correction function has been added. 3. The following features are enabled for these lenses: For CN-E18-80mm T4.4 L IS KAS S or CN-E70-200mm T4.4 L IS KAS S when "NU Protocol" is selected: - Focus position control - Zoom position control Menu Pathway: [Other Functions] > [REMOTE B Term.] > [NU Protocol] *In some cases, the firmware of these lenses needs to be updated in order to enable the enhancements. Contact your Canon dealer for details.
- For further information, please refer to the latest version of the unit's Instruction Manual that is released with the firmware update.
Caution: - Firmware Version 18.104.22.168.00 is for ME20F-SH cameras with Firmware Version 22.214.171.124.00 – 126.96.36.199.00. If your camera's firmware is already Version 188.8.131.52.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
Preparations for the Firmware Update: - After the firmware update has been performed, the date/time settings and the camera's menu settings will be reset. Please configure the date/time settings and the camera's menu settings to their pre-update values after the firmware update is complete.
- The downloaded folder contains the firmware (file name: VLF5.FIM / file size: 22,872,092 bytes), and instructions on the firmware update procedures (a PDF file in four languages: Japanese, English, French and Spanish). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following things are required to perform this firmware update: 1. A ME20F-SH Multipurpose Camera 2. A computer (OS: Mac OS 10.7 - 10.14) 3. A microSD / microSDHC / microSDXC card (all commercially available) 4. A microSD card reader/writer (commercially available) 5. External power supply (commercially available) 6. The firmware (the downloaded file)
History: Changes in Firmware Version 184.108.40.206.00: 1. Adds [Linear]* to the gamma curve setting: - [Custom Picture] > [Fine Tuning] > [Gamma] > [Linear] *Does not apply a gamma curve. Creates a linear relationship between the luminance input and output. 2. The following features are enabled for the CN-E70-200mm T4.4 L IS KAS S: - Displaying the model name of the lens when attached. - Support for Peripheral illumination correction. - Manual control of the iris with camera's joystick. - Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100. - Support for One shot autofocus. - Automatic aperture and push auto iris functions. - Start/stop recording on the separately-sold lens grip ZSG-C10. 3. Adds Peripheral Illumination Correction for the following lenses: - EF 70-300mm f/4-5.6 IS II USM - EF 16-35mm f/2.8L III USM - EF-S 35mm f/2.8 Macro IS STM - EF 85mm f/1.4L IS USM 4. Adds [NU protocol] to the other functions setting: - [Other Functions] > [REMOTE B Term.] > [NU Protocol] 5. When the camera is turned off the IS mechanical lock will be active regardless of the position of the switch.
Changes in Firmware Version 220.127.116.11.00: 1. Three camera modes have been added: - Tv: Shutter speed is selectable. Iris, Gain and ND Filter* are set automatically. - Av: Iris is selectable. Shutter speed, Gain and ND Filter* are set automatically. - AGC: Shutter speed and Iris are selectable. Gain and ND Filter* are set automatically. *ND Filter can alsobe set manually. 2. The following features are enabled for the CN-E18-80mm and T4.4 L IS KAS S: - Saving and displaying metadata, such as the model name and the focal distance of the lens when attached. - Support for Peripheral Illumination Correction. - Manual Iris control via the camera's joystick. - Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100. - One shot autofocus. - Automatic aperture and push auto iris functions. - Operation of REC start/stop by the separately-sold ZSG-C10. 3. Adds Peripheral Illumination Correction for the following lenses: - EF 100-400mm f/4.5-5.6L IS II USM - EF 35mm f/1.4L II USM - EF 24-105mm f/4L IS II USM 4. Adds chroma-key correction function. 5. Adds three white balance modes when the camera is set to Auto: custom White Balance Set, Preset and Color temperature. 6. Adds 25PsF on output format. 7. Adds [59.94P(i)]* and [50.00P(i)]* output setting for Monitor terminal. • When the frame rate is set to 59.94P (NTSC) or 50.00P (PAL), the 3G/HD-SDI 1 / MONITOR terminal can be set to output interlaced signal. * When using this setting 3G/HD-SDI 2 will output progressive signal.
Changes in Firmware Version 18.104.22.168.00: 1. Adds a function to turn off the onscreen display information automatically during recording. 2. Adds 3x magnification to the digital tele-converter. 3. Adds aspect marker options. - Aspect ratio can be selected from 4:3, 4:3 (S35mm), 1.66:1, 1.85:1 and 2.39:1 4. Adds an auto slow shutter ON/OFF function. - When set to [OFF] and the camera is set to [Auto] mode, the shutter speed will not drop below the set frame rate.
Changes in Firmware Version 22.214.171.124.00: Corrects a phenomenon in which after long hours of consecutive power conduction, the power of the camera cannot be turned off from the main power switch or the camera cannot be initialized from the menu. (After the power source is detached and attached, camera operations are restored.)
File Name : me20f-v1051-mac.dmg File Type : FA File Size : 19153522KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.