Solution
Selecting Wireless LANSetting Up Connection Using WPS Push Button Mode
Setting Up Connection Using WPS PIN Code Mode
Viewing Network Settings
Selecting Wireless LAN
After you decide on wired or wireless LAN to connect the machine to the computer, select wired LAN or wireless LAN using the operation panel. Note that if you change the setting from ⋖Wired LAN⋗ to ⋖Wireless LAN⋗ or vice versa, you will need to uninstall MF Drivers installed on your computer and then reinstall them. For more information, see "MF Driver Installation Guide."
1. Tap ⋖Menu⋗ in the Home screen.
2. Tap ⋖Network Settings⋗.
3. Tap ⋖Select Wired/Wireless LAN⋗.
4. Tap ⋖Wireless LAN⋗.
Setting Up Connection Using WPS Push Button Mode
If your wireless router supports WPS push button mode, you can easily set up a connection with a WPS button.
Caution
How to operate the wireless router may vary on each device. See the instruction manuals for your networking device for help.
1. Tap ⋖Menu⋗ in the Home screen.
2. Tap ⋖Network Settings⋗.
3. Tap ⋖Wireless LAN Settings⋗.
4. Read the message that is displayed, and tap ⋖OK⋗.
5. Tap ⋖WPS Push Button Mode⋗.
6. Tap ⋖Yes⋗.
7. Press and hold the WPS button on the wireless router.
If an error message is displayed during setup
8. Check that the Wi-Fi indicator is blinking on the operation panel.
When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi indicator lights up. Wait approximately 2 minutes (until the automatic settings of IP address and other items are complete).
Signal strength
Caution
Reducing power consumption
If the IP address of the machine has changed
Setting Up Connection Using WPS PIN Code Mode
If your wireless router supports WPS PIN code mode, generate a PIN code with the machine and register the code to the networking device.
Caution
From a Computer
1. Access your wireless router from a computer and display the screen for entering a WPS PIN code.
From the Operation Panel
2. Tap ⋖Menu⋗ in the Home screen.
3. Tap ⋖Network Settings⋗.
4. Tap ⋖Wireless LAN Settings⋗.
5. Read the message that is displayed, and tap ⋖OK⋗.
6. Tap ⋖WPS PIN Code Mode⋗.
7. Tap ⋖Yes⋗.
A PIN code is generated.
From a Computer
8. Register the generated PIN code to the wireless router.
If an error message is displayed during setup
From the Operation Panel
9. Check that the Wi-Fi indicator is blinking on the operation panel.
When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi indicator lights up. Wait approximately 2 minutes (until the automatic settings of IP address and other items are complete).
Signal strength
You can set the IP address manually. [ Setting IP Addresses ]
Caution
Reducing power consumption
If the IP address of the machine has changed
Viewing Network Settings
Caution
Viewing IPv4 Settings
⋖Network Information⋗⋖IPv4⋗Select the setting to viewCheck the settings
Viewing IPv6 Settings
⋖Network Information⋗⋖IPv6⋗Select the setting to viewCheck the settings