Firmware Version 1.0.3.0 incorporates the following enhancement. 1. Support for CFast cards (VPG130) has been added.* *For detailed information about CFast cards that have been verified to work with this camera, please visit Canon's Web site.
Caution: You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 64MB or more for the firmware update.
Firmware Version 1.0.3.0 is for camcorders with Firmware Version 1.0.0.0 - 1.0.2.0. If your camera's firmware is already Version 1.0.3.0, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
For further details, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update.
Preparations for the Firmware Update: After the Firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
The downloaded folder contains the firmware (file name: VLA4.FIM / file size: 23,658,524 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following things are required to perform this firmware update: 1. A XC10 camcorder 2. A computer (OS: Mac OS 10.7-10.12) 3. A 64 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available) 4. An SD card reader/writer (commercially available) or an SD card slot built into the computer 5. A fully charged battery pack for the camera 6. Compact power adapter bundled with the camera 7. The firmware (the downloaded file)
History Changes Version 1.0.2.0: 1. Enables users to select an MP4 recording format for recording HD video. 2. Increases the AF speed by a maximum of approximately two times. 3. Adds an AF speed settings menu (Fast/Normal/Slow). 4. Enhances the image quality in low brightness during HD shooting. 5. Makes onscreen displays possible during HDMI output (for HD video only). 6. Adds a shutter setting value (NTSC:1/25, 1/50; PAL:1/30) as a flicker reduction measure.
Changes Version 1.0.1.0: 1. Adds Rolling Shutter Distortion Reduction function in Camera Setup Menu to enable image recording with reduced rolling shutter distortion when shooting 4K movies.
File information
File Name : xc10-v1030-mac.dmg File Type : FA File Size : 25738852KB
Canon Driver Downloads is for the support of Canon Products SOLD IN AUSTRALIA AND NEW ZEALAND ONLY. It includes drivers and demonstration software for Canon brand printers, scanners, cameras and other Canon products.
DISCLAIMER: CANON AUSTRALIA PTY LTD MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. CANON AUSTRALIA PTY LTD SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
Export: Some of the software is subject to export controls under the U.S. Export Administration Regulations (EAR), and anyone receiving the software cannot export the software without a license or other authorisation of the U.S. Canon will not be liable for any loss of whatsoever nature incurred as a result of this prohibition.
Applicable software includes;
- Software using OS created by US companies
- Driver software (printer driver, fax driver),
- Utility software (Network ScanGear),
- Application software (imageWARE products),
- Support tool (SST, NAVI, etc)
- Firmware of the device (main body)
and any further software that may from time to time be added to this list.
Close
