PIXMA MX516 Support

FAQ and troubleshooting

Setting Up the FAX

Content Id: 8201369200

To use the fax features of the machine, you can enter the fax settings through the Easy setup.

Press the MENU button, then select in the order of Device settings ⋗ FAX settings ⋗ Start Easy setup or Easy setup ⋗ OK button or Start setup.

Use the button to select the item, then press the OK button.

Easy setup starts up.

Follow the on-screen instruction to complete the settings in accordance with the operating environment.

Connect to a Telephone Jack

Connect the machine to a telephone jack with the supplied telephone line cable.

The connector is labeled on the back of the machine.

A basic connection method is shown in this figure.

Users in Europe: If you prepare your own telephone line cable, be sure it is a 6-wire

telephone line cable.

Connect to a Telephone

When connecting a telephone or an answering machine, remove the Cap, then connect a telephone or an answering machine with a telephone line cable.

The connector is labeled on the back of the machine.

Do not use a telephone jack line duplexer.

Users in UK: Use a B.T. adapter for connection as required.

Enter the User information settings and Date/time setting

Enter the DRPD or Network switch settings

DRPD is available only in US and Canada.

Network switch may not be available depending on the region or country.

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit