Checking Ink Tank Levels (iPF9400) (iPF9400S)

Content Id: 8201669100

Solution

Caution

There may be cases that it differs partially from the illustration by the models you use.

On the Display Screen, you can check how much ink is left in the ink tanks.

To check remaining Ink Tank levels, access the Tab Selection screen on the Control Panel and press or to select the Ink tab ().

Caution

If the Tab Selection screen is not displayed, press the Menu button.

If an error has occurred and the Tab Selection screen cannot be displayed, display Ink Info as follows.

1. Press the OK button to display Printer Info.

2. Press the or button to select Ink Info.

3. Press the OK button.

The remaining ink levels shown on the Display Screen correspond to the inks identified by the Color Label on the bottom of the Display Screen.

These symbols may be displayed above the ink level: ! if ink is low, × if no ink is left, and ? if you have deactivated ink level detection.

The remaining ink level is indicated as shown below.

If the Display Screen indicates to replace the Ink Tank, replace the Ink Tank. If a message is displayed indicating to check the remaining ink levels, or after tasks that consume a lot of ink such as large-format printing or head cleaning, check the remaining levels and replace Ink Tank as needed. (See "Replacing Ink Tanks (iPF9400) (iPF9400S).")

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit