imageCLASS MF9220cdn Support

FAQ and troubleshooting

Setting Paper Size and Type

Content Id: 8200925300

Solution

For the Stack Bypass Tray
For the Paper Drawer

For the Stack Bypass Tray

You can register a frequently used paper size and type for the stack bypass tray.

The default setting is ⋖Off⋗.

1. Press (Main Menu).

2. Press the right Any key to select ⋖Additional Func.⋗.

3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Paper Settings⋗, then press [OK].

4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Stack Bypass Paper (Std.)⋗, then press [OK].

5. Use [ ] , [ ] or (Scroll Wheel) to select ⋖On⋗, then press the right Any key to select ⋖Option⋗.

If you do not want to set the stack bypass standard settings, select ⋖Off⋗, then press [OK], and press (Main Menu) to return to the Main Menu screen.

If you register a standard paper size:

1 Use [ ] , [ ] or (Scroll Wheel) to select paper size, then press [OK].

You can select from the following paper sizes:

⋖A4⋗, ⋖A5⋗, ⋖B5⋗, ⋖Custom Size⋗, ⋖COM10⋗, ⋖Monarch⋗, ⋖DL⋗, ⋖ISO-C5⋗, ⋖ISO-B5⋗

If you use inch size paper, press the left Any key to select ⋖Inch Size⋗ and select the paper size you want to use.

If you register an irregular paper size:

1. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Custom Size⋗, then press [OK].

2. Use [ ] , [ ] or (Scroll Wheel) to select ⋖X:⋗ (length for the short edge), then press [OK].

Caution

If the irregular paper sizes have previously been set, you can recall the size setting.

3. Use [ ] , [ ], (Scroll Wheel) or - (numeric keys) to enter the length for X (short edge), then press [OK].

4. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Y:⋗ (length for the long edge), then press ⋖OK⋗.

5. Use [ ] , [ ], (Scroll Wheel) or - (numeric keys) to enter the length for Y (long edge), then press [OK].

6. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Set Size⋗, then press [OK].

If you register an irregular paper size by recalling the previously set size:

You can recall the previously set paper size.

1. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Custom Size⋗, then press [OK].

2. Press the right Any key to select ⋖Recall/Register⋗.

3. Use [ ] , [ ] or (Scroll Wheel) to select ⋖Size 1⋗ or ⋖Size 2⋗, then press [OK].

The recalled paper size is displayed.

Caution

You can also edit the previously set size or register a new irregular size from this display. Press the right Any key to select ⋖Register/Edit⋗ → select ⋖Size 1⋗ or ⋖Size 2⋗ → press [OK] → specify the lengths for ⋖X:⋗ and ⋖Y:⋗ → select ⋖Set Size⋗ → press the right Any key to select ⋖Done⋗ → select ⋖Back⋗ → press [OK].