Replacing the Toner Cartridge
1. Open the front cover while holding down the open button.
2. Remove the toner cartridge.
3. Take out the new toner cartridge from the protective bag.
You can open the protective bag with your hands from the notch.
* Store the protective bag. It is required when you remove the toner cartridge for the machine maintenance or other purposes.
4. Gently shake the toner cartridge five or six times to evenly distribute the toner inside the cartridge.
5. Place the toner cartridge on a flat surface.
6. Fold the tab, and the pull out the sealing tapes (approximately 50 cm).
Caution
Precautions when pulling out the sealing tape
7. Insert the toner cartridge.
Fit (A) on both sides of the toner cartridge into the guides located on both sides of the machine and slide the toner cartridge into the machine until the toner cartridge comes to rest and is held against the back of the machine.
8. Close the front cover.
Caution
If you cannot close the front cover
Attention (Replacing the Toner Cartridge)
Caution
Do not dispose of a used toner cartridge in an open flame.
When cleaning up spilled or scattered toner:
Caution
Precautions to take when you get toner onto your hands or clothing
Do not allow the toner to scatter.
Caution
About replacement toner cartridges
Be careful of counterfeit toner cartridges.
Shake the toner cartridge before replacement.
Hold the toner cartridges properly.
Do not touch the electrical contacts (A) or the toner cartridge memory (B), and do not open the drum protective cover (C).
Print quality may deteriorate if you touch or damage the photoconductor drum. Never touch it or open the drum protective cover (C).
Do not touch the high-voltage contacts (D) or the electrical contacts (E).
Miscellaneous precautions
Caution
About the packing materials
When ⋖Continue Printing When Toner Is Low⋗ is set to ⋖On⋗