This camera can display an [Electronic Level] as a guide to determine whether the camera's LCD monitor is level.
Please use it as a guide for determining whether the camera is level when shooting.
Caution
Display the Electronic Level
1. Press the ⋖DISP.⋗ button () a few times to display the [Electronic Level].
2. Level the camera.
Adjust the camera's tilt on the left and right sides so that the center of the [Electronic Level] turns green.
Caution
Calibrating the Electronic Level
If the subject does not appear level even when the camera's tilt has been adjusted so that the center of the [Electronic Level] is green, calibrate the [Electronic Level].
If you use the [Grid Lines] to confirm that the camera is level beforehand, you can calibrate the electronic level more accurately.
Caution
3. Press the ⋖MENU⋗ () button.
4. The following window appears.
Operate the ⋖directional buttons⋗ left or right to select the [Set up] () tab.
Operate the ⋖directional buttons⋗ up or down to select [Electronic Level].
After making a selection, press the ⋖FUNC./SET⋗ () button.
5. The following window appears.
Check that [Calibrate] is selected, and then press the ⋖FUNC./SET⋗ button ().
Caution
If you want to restore the default settings for the [Electronic Level], select [Reset].
If the [Electronic Level] has not been calibrated, it cannot be reset.
6. The following window appears.
Operate the ⋖directional buttons⋗ left or right to select [OK].
After making a selection, press the ⋖FUNC./SET⋗ () button.
7. The following window appears.