Close
The menu item [IS Mode] is not displayed in the following cases:
・When EF or EF-S lense is attached
・When EF-M lense with no Image Stabilizer function attached.
Also, even in EF-M lenses with Image Stabilizer function, when set to the [ 
Caution
Lenses with built-in image stabilization have "IS" in their names. IS stands for Image Stabilizer.
Caution
Do not use image stabilization for bulb exposures. Doing so may lead to incorrect image stabilization behavior.
EF-M Lenses
For non-IS lenses, such as EF-M 22mm F2 STM, the [IS Mode] menu option will not be displayed.
For lenses equipped with an IS feature, such as EF-M 18-55mm F3.5-5.6 IS STM, refer to the following procedure to set IS.
At the time of purchase, the [IS Mode] option is set to [ON].
1. 1. Set the camera’s power to [ON].
2. Press the [MENU] button.
3. Press the [ 
4. Press the [ 
5. Press the [
6. Press the [
| On | If using a lens with built-in image stabilization, the camera compensates for camera movement and hand shaking to stabilize the image when shooting. |
| Off | Deactivates image stabilization. |
7. Press the [MENU] button to close the menu.
Caution
EF Lenses/EF-S Lenses
[IS Mode] is not displayed for lenses other than EF-M lenses. Use
the image stabilization switch on the lens instead.
The Image Stabilizer will operate when the lens’ [STABILIZER] (Image Stabilizer switch) is set to [ON] as shown in the bellow image.
Non-IS EF lenses do not include a [STABILIZER] (Image Stabilizer switch).
