MB5100 series MP Drivers Ver.1.03 (Windows)

Content Id: 0100733204

About the driver

Outline

This driver will provide full printing and scanning functionality for your product.

Update History

[Ver.1.03]
- The modules for supporting the language have been updated.

[Ver.1.02]
- Windows 11 has been added as a supported OS.
- The failure that may disable installation when PC detects the printer before driver is installed is modified. (Windows 10)

[Ver.1.01]
- The failure that may cause installation failure is modified.

System requirements

Windows 11
Windows 10 (32bit)
Windows 10 (64bit)
Windows 8.1(32bit)
Windows 8.1(64bit)
Windows 8(32bit)
Windows 8(64bit)
Windows 7(32bit)
Windows 7(64bit)
Windows Vista SP2 or later(32bit)
Windows Vista SP2 or later(64bit)

Setup Instructions

Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded EXE file to decompress it, then installation will start automatically.


Note:
A message may be displayed during the installation depending on the OS you are using, but continue the installation.

Caution

Printer Driver:
1.[Windows 10/11]
Some of the settings (such as borderless printing) in the OS standard print settings screen are not valid. the settings in the Printer printing Preferences window are valid. Make settings in Printer printing Preferences when necessary.

2.[Windows 10/11]
Layout printing from the OS standard print settings screen may not be performed as expected in Some instances.
In such cases, open the Printer Printing Preferences window and change the paper size accordingly.

3.With Internet Explorer 11, a web site containing Japanese may not be printed properly. In Windows Update, update the OS and Internet Explorer to the latest version.

Scanner Driver:
1.If the OS is upgraded with the scanner driver remained installed, scanning by pressing the SCAN button on the Printer may not be performed After the upgrade. in such cases, re-install the scanner driver.

2.When MP Driver installation was stopped by the following acts with the screen awaiting connection, install it again. The installation is not completed even if plugged-in the USB cable again or turned-on the power supply again.
- To cancel the installation.
- To plugged-out the USB cable.
etc,

3.The scan from the scan button of the printer does not work when the connection is changed from the network connection to the USB connection. Install MP Driver again, and change the connection method.

File information

File Name : m68n-win-mb5100-1_03-ea34_2.exe
File Type : DR
File Size : 41307944KB