Canon Group
Close Close
Menu Menu Close Close Search
PowerShot SX720 HS Support
FAQ and troubleshooting

The camera is not recognized by the computer (Windows 8)

Content Id: 8202374400


Follow the steps below if the camera is not recognized by your Windows 8 computer.

Caution

Use a USB cable to connect the camera and the computer.
Depending on the camera model, a USB cable may not be included with the camera.
If you do not own a USB cable, please purchase one separately.
The following two types of USB cables are available for compact digital cameras:

 - Camera end: Mini-B (IFC-400PCU)

 - Camera end: Micro-B (IFC-600PCU)

*For more information about the type of USB cable that can be used with your camera, please refer to the camera’s instruction manual.

Caution

If the camera is not recognized by the CameraWindow software, please check whether any of the following cases may be a remedy to the problem.

The supported software version may differ depending on the camera you use and the operating system installed on the computer.
When using a camera or computer that differs from the model used initially, please download the supported version of CameraWindow. Versions of the CameraWindow for a variety of cameras/operating systems can be downloaded from the Canon homepage.

Caution

Importing problems may occur if there are too many images (more than 1,000) on the memory card.

In this case, use a memory card reader to import the images.

1. Try connecting the camera to a different USB terminal.

If there are multiple USB terminals on your computer, connecting the cable to a different USB terminal may allow the camera to be recognized by the computer.

2. Try using the Device Manager

1. Move the pointer to the bottom right to display the Charms. When the Charms are displayed, select [Settings] and then select [Control Panel].

2. Click [Hardware and Sound].

3. Click [Device Manager].

4. Double-click [Portable Devices].

5. Click the model name of your camera, then click [ ].

6. Click [OK].

7. Click [ ].

8. If the camera is recognized, the following screen will be displayed.

Caution

If the [Tap to choose what happens with this device] screen appears in the upper right of the desktop, the screen may turn off.
If you would like to import images, start CameraWindow and follow the procedures explained below.

1. Click [Tap to choose what happens with this device].

2. Select [Page for Canon EOS (camera model number)].

3. CameraWindow will start.

"Was this helpful?"