Solution
How to set High-Speed Continuous Shooting (High-speed Burst HQ)Viewing Each Image in a Group (Group Playback)
How to set High-Speed Continuous Shooting (High-speed Burst HQ)
You can shoot continuously while the shutter button is pressed and held down fully.
You can shoot up to 10 continuous shots at a maximum speed of approx. 10 images per second with the PowerShot G15/
HQ stands for "High Quality".
Caution
Note that some types of memory cards may delay your next shot even
longer. SD Speed Class 6 or higher memory cards are recommended.
- [Flash] (), [Date Stamp], [Self-Timer] ( )
For unavailable functions other than the ones indicated above, see the [Camera User Guide] supplied with the product.
Caution
1. Set the ⋖Mode Dial⋗ to() and then press the ⋖Power⋗ button.
2. Press the ⋖FUNC./SET⋗ () button.
3. The following screen appears.
Operate the ⋖directional buttons⋗ up or down to select the [Rec. Mode]. (If no changes have been made so far, [Portrait] () will be displayed.)
4. The following screen appears.
Operate the ⋖directional buttons⋗ right or left to select the [High-speed Burst HQ] (),
Press the ⋖FUNC./SET⋗ () button.
5. The following screen appears.
If the [High-speed Burst HQ] () icon is displayed on the upper-right part of the screen, the setting is completed.
As long as you hold the ⋖shutter button⋗ down, the camera will shoot successive images.
Release your finger from the shutter button to finish shooting, or shooting will end automatically when the maximum number of images have been shot.
Viewing Each Image in a Group (Group Playback)
When playing back images, images taken in [High-speed Burst HQ] () mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.
Caution
If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.
Caution
To view images taken in [High-speed Burst HQ] () mode as a group, press ⋖MENU⋗ (), and then select [On] for [Group Images] in the [Playback Menu] () tab. (By default, [On] is selected.)
1. Choose an image group.
Operate the ⋖directional buttons⋗ left or right to choose an image that displays ().
Press the ⋖FUNC./SET⋗() button.
2. The following screen appears.
Operate the ⋖directional buttons⋗ left or right to view images in the group individually.
If you press the ⋖Filtering image display⋗ () button, [Display all images] will appear on the screen. Press the ⋖FUNC./SET⋗ () buttton to exit group playback.